HOME
PRODUCTS
GALLERY
THEY SAY
CONTACT US

306144SP317 Technical Profile    Application Target/Tactical

Barrel Bore Diameter: 0.296" 7.510 mm The diameter of the barrel from land to land.
Barrel Groove Diameter: 0.306" 7.770 mm The diameter of the barrel from groove to groove.
Bullet Weight: 144gr 9.3g Bullets are guaranteed to weigh within 0.25% of the stated weight.
Bullet Length: 1.36" 34.500 mm
Secant Ogive Length: 0.70" 17.889 mm These dimensions are critical to consistent external ballistic performance and are held constant to within 0.005 mm (0.0002")
Meplat Diameter: 0.03" 0.751 mm
Min Bullet Protrusion: 0.80" 20.430 mm Add the case length to these numbers to determine the maximum and minimum cartridge overall length that is possible with this bullet.
Max Bullet Protrusion: 0.98" 25.000 mm
Bullet conforms to CIP and SAAMI for magazine length. Check the magazine length of your rifle for suitability with this bullet.
Maximum M/V: 3050fps 930 m/s If the maximum muzzle speed is exceeded, dynamic stabilty problems may be encountered.
       

Twist Rates are guidelines but the Minimum Twist must be observed 

Twist: Sg = 1.4: 10.0" / 255 mm or tighter 34.0 Calibers or tighter The twist required to give a calculated Sg 1.4
Minimum Twist: 11" / 279.4 mm 37.2 Calibers The slowest twist required for stable flight and the best long range tractability more than 490 yds or 450 m. See the 'Notes' below.

Calculated Ballistic Coefficient - Standard Metro G1 profile

BC = 0.500 Maximum M/V to 2125 fps Maximum M/V to 648 m/s Any comparison with the BC values of other manufacturers is not valid as there is currently no standard method in use between manufacturers.  These BC values are only for use in an external ballistics program. Use the three values, as given, to approximately calculate BC for your launch speed and distance. For exact numbers, shoot drop tables at the elevation and temperature for your location.
BC = 0.463 2125 fps to 1200 fps 648 m/s to 366 m/s
BC = 0.340 1200 fps to 0 fps 366 m/s to 0 m/s

Suitable Cartridges, with consideration of the above specifications:

7.5x55 Dedicated

NOTES

A Gyroscopic Stability (Sg) greater than 1.2 is required for SP bullets. For use under 490yds/450m an Sg of up to 1.5 or even greater can be used. For distances beyond 490yds/450m, the Sg can be decreased with a slower twist, but never less than 1.2 for GSC SP bullets.
*Note that Sg increases as twist tightens.  *A 1:10" twist is tighter than a 1:12" twist within a given caliber only. *Twist rates given in caliber lengths can be compared across calibers. *Choose a bullet length best suited to your rifle twist and type of shooting.  *When a bullet is specified for a given twist rate, it can also be used in any twist that is tighter.  Using it in a slower twist than specified, is not advisable. *Some experimentation will be required to determine exact drop tables for your equipment and location.