GS CUSTOM USA - Bullet Technical Profile

HOME

PRODUCTS

GALLERY

THEY SAY

585640FN106 Technical Profile © Application Dangerous Game Hunting

Barrel Bore Diameter: 0.577" 14.660 mm The diameter of the barrel from land to land.

Barrel Groove Diameter: 0.585" 14.860 mm The diameter of the barrel from groove to groove.

Bullet Weight: 640gr 41.5g Bullets are guaranteed to weigh within 0.25% of the stated weight.

Bullet Length: 1.13" 28.820 mm

Conical Ogive Length 0.51" 12.900 mm These dimensions are critical to consistent external ballistic performance and are held constant to within 0.005 mm (0.0002")

Meplat Diameter: 0.31" 7.900 mm

Min Bullet Protrusion: 0.60" 15.240 mm Add the case length to these numbers to determine the maximum and minimum cartridge overall length (COL) that is possible with this bullet.

Max Bullet Protrusion: 0.91" 23.000 mm

Bullet conforms to CIP and SAAMI for magazine length. . Check the COL of your rifle for suitability with this bullet as described above.

Maximum M/V: 3400fps 1 036 m/s If the maximum muzzle speed is exceeded, dynamic stabilty problems may be encountered.

Twist Rates are guidelines but the Minimum Twist must be observed

Minimum Twist rate: 41" / 1041.4 mm 71.04 Calibers For linear penetration, select a bullet that meets the minimum recommended twist rate or is tighter. See 'Notes'

Calculated Ballistic Coefficient - Standard Metro G1 profile

BC = 0.133 Maximum M/V to 2300 fps Maximum M/V to 701 m/s Any comparison with the BC values of other manufacturers is not valid as there is currently no standard method in use between manufacturers. These BC values are only for use in an external ballistics program. Use the three values, as given, to approximately calculate BC for your launch speed and distance. For exact numbers, shoot drop tables at the elevation and temperature for your location.

BC = 0.117 2300 fps to 1200 fps 701 m/s to 366 m/s

BC = 0.148 1200 fps to 0 fps 366 m/s to 0 m/s

Suitable Cartridges, with consideration of the above specifications:

585 Nyati, 585 African Express, 577 T-Rex, 577 3" NE

NOTES

A minimum twist rate of 1:41" or tighter, is preferred for this FN bullet.

*Note that Sg increases as twist tightens. *A 1:10" twist is tighter than a 1:12" twist within a given caliber only. *Twist rates given in caliber lengths can be compared across calibers. *Choose a bullet length best suited to your rifle twist and type of shooting. *When a bullet is specified for a given twist rate, it can also be used in any twist that is tighter. Using it in a slower twist than specified, is not advisable. *Some experimentation will be required to determine exact drop tables for your equipment and location.

585640FN106 Technical Profile © Application Dangerous Game Hunting

Barrel Bore Diameter:	0.577"	14.660 mm	The diameter of the barrel from land to land.
Barrel Groove Diameter:	0.585"	14.860 mm	The diameter of the barrel from groove to groove.
Bullet Weight:	640gr	41.5g	Bullets are guaranteed to weigh within 0.25% of the stated weight.
Bullet Length:	1.13"	28.820 mm
Conical Ogive Length	0.51"	12.900 mm	These dimensions are critical to consistent external ballistic performance and are held constant to within 0.005 mm (0.0002")
Meplat Diameter:	0.31"	7.900 mm
Min Bullet Protrusion:	0.60"	15.240 mm	Add the case length to these numbers to determine the maximum and minimum cartridge overall length (COL) that is possible with this bullet.
Max Bullet Protrusion:	0.91"	23.000 mm
Bullet conforms to CIP and SAAMI for magazine length. . Check the COL of your rifle for suitability with this bullet as described above.
Maximum M/V:	3400fps	1 036 m/s	If the maximum muzzle speed is exceeded, dynamic stabilty problems may be encountered.

Twist Rates are guidelines but the Minimum Twist must be observed
Minimum Twist rate:	41" / 1041.4 mm	71.04 Calibers	For linear penetration, select a bullet that meets the minimum recommended twist rate or is tighter. See 'Notes'

Calculated Ballistic Coefficient - Standard Metro G1 profile
BC = 0.133	Maximum M/V to 2300 fps	Maximum M/V to 701 m/s	Any comparison with the BC values of other manufacturers is not valid as there is currently no standard method in use between manufacturers. These BC values are only for use in an external ballistics program. Use the three values, as given, to approximately calculate BC for your launch speed and distance. For exact numbers, shoot drop tables at the elevation and temperature for your location.
BC = 0.117	2300 fps to 1200 fps	701 m/s to 366 m/s
BC = 0.148	1200 fps to 0 fps	366 m/s to 0 m/s
Suitable Cartridges, with consideration of the above specifications:

585 Nyati, 585 African Express, 577 T-Rex, 577 3" NE


NOTES
A minimum twist rate of 1:41" or tighter, is preferred for this FN bullet.

Note that Sg increases as twist tightens. A 1:10" twist is tighter than a 1:12" twist within a given caliber only. Twist rates given in caliber lengths can be compared across calibers. Choose a bullet length best suited to your rifle twist and type of shooting. When a bullet is specified for a given twist rate, it can also be used in any twist that is tighter. Using it in a slower twist than specified, is not advisable. Some experimentation will be required to determine exact drop tables for your equipment and location.