GS CUSTOM USA - Bullet Technical Profile

HOME

PRODUCTS

GALLERY

THEY SAY

264095HV134 Technical Profile © Application: General Hunting

Barrel Bore Diameter: 0.256" 6.500 mm The diameter of the barrel from land to land.

Barrel Groove Diameter: 0.264" 6.710 mm The diameter of the barrel from groove to groove.

Bullet Weight: 95gr 6.2g Bullets are guaranteed to weigh within 0.25% of the stated weight.

Bullet Length: 1.18" 30.000 mm

Secant Ogive Length: 0.67" 17.087 mm These dimensions are critical to consistent external ballistic performance and are held constant to within 0.005 mm (0.0002")

Meplat Diameter: 0.06" 1.650 mm

Min Bullet Protrusion: 0.76" 19.180 mm Add the case length to these numbers to determine the maximum and minimum cartridge overall length that is possible with this bullet.

Max Bullet Protrusion: 0.91" 23.000 mm

Bullet conforms to CIP and SAAMI for magazine length. Check the magazine length of your rifle for suitability with this bullet.

Maximum M/V: 4000fps 1,219 m/s If the maximum muzzle speed is exceeded, dynamic stabilty problems may be encountered.

Short Range Twist: 8.1" / 206 mm or tighter 31.7 Cal/length or tighter Twist recommended if average hunting distances are 250 yards or 230 m. A tighter twist can be used.

Twist: Sg = 1.5: 9.0" / 226 mm 34.7 Cal. in length General hunting twist for average distances to 500 yards or 460 m. A tighter twist can be used.

Minimum Twist: 10" / 254 mm 39.1 Calibers in length The twist required for stable flight and good terminal performance further than 500 yds or 460 m.

Minimum Impact Speed: 1600fps 488 m/s At this impact speed, the bullet will open to at least double caliber.

Calculated Ballistic Coefficient - G1 profile

BC = 0.421 4000 fps to 2800 fps 1,219 m/s to 853 m/s BC values are calculated at standard Metro values and serve as a comparison between GSC bullets. Any comparison with the BC values of other manufacturers is not valid as there is currently no standard method in use between manufacturers.

BC = 0.368 2800 fps to 1600 fps 853 m/s to 488 m/s

BC = 0.354 1600 fps to 0 fps 488 m/s to 0 m/s

Suitable Cartridges, with consideration of the above specifications:

260 Remington, 264 Win Mag, 6.5 Rem.Mag, 6.5-284, 26 Nosler

NOTES

A Gyroscopic Stability (Sg) greater than 1.1 is required for stable flight with HV and HP bullets. For hunting at average 500yds/460m, an Sg of up to 1.5 or more can be used. For longer distances the Sg can be decreased but never less than 1.1.

*Note that Sg increases as twist tightens. *A 1:10" twist is tighter than a 1:12" twist within a given caliber only. *Twist rates given in caliber lengths can be compared across calibers. *Choose a bullet length best suited to your rifle twist and type of shooting. *When a bullet is specified for a given twist rate, it can also be used in any twist that is tighter. Using it in a slower twist than specified, is not advisable. *Some experimentation will be required to determine exact drop tables for your equipment and location.

264095HV134 Technical Profile © Application: General Hunting

Barrel Bore Diameter:	0.256"	6.500 mm	The diameter of the barrel from land to land.
Barrel Groove Diameter:	0.264"	6.710 mm	The diameter of the barrel from groove to groove.
Bullet Weight:	95gr	6.2g	Bullets are guaranteed to weigh within 0.25% of the stated weight.
Bullet Length:	1.18"	30.000 mm
Secant Ogive Length:	0.67"	17.087 mm	These dimensions are critical to consistent external ballistic performance and are held constant to within 0.005 mm (0.0002")
Meplat Diameter:	0.06"	1.650 mm
Min Bullet Protrusion:	0.76"	19.180 mm	Add the case length to these numbers to determine the maximum and minimum cartridge overall length that is possible with this bullet.
Max Bullet Protrusion:	0.91"	23.000 mm
Bullet conforms to CIP and SAAMI for magazine length.			Check the magazine length of your rifle for suitability with this bullet.
Maximum M/V:	4000fps	1,219 m/s	If the maximum muzzle speed is exceeded, dynamic stabilty problems may be encountered.
Short Range Twist:	8.1" / 206 mm or tighter	31.7 Cal/length or tighter	Twist recommended if average hunting distances are 250 yards or 230 m. A tighter twist can be used.
Twist: Sg = 1.5:	9.0" / 226 mm	34.7 Cal. in length	General hunting twist for average distances to 500 yards or 460 m. A tighter twist can be used.
Minimum Twist:	10" / 254 mm	39.1 Calibers in length	The twist required for stable flight and good terminal performance further than 500 yds or 460 m.
Minimum Impact Speed:	1600fps	488 m/s	At this impact speed, the bullet will open to at least double caliber.
Calculated Ballistic Coefficient - G1 profile
BC = 0.421	4000 fps to 2800 fps	1,219 m/s to 853 m/s	BC values are calculated at standard Metro values and serve as a comparison between GSC bullets. Any comparison with the BC values of other manufacturers is not valid as there is currently no standard method in use between manufacturers.
BC = 0.368	2800 fps to 1600 fps	853 m/s to 488 m/s
BC = 0.354	1600 fps to 0 fps	488 m/s to 0 m/s
Suitable Cartridges, with consideration of the above specifications:

260 Remington, 264 Win Mag, 6.5 Rem.Mag, 6.5-284, 26 Nosler


NOTES
A Gyroscopic Stability (Sg) greater than 1.1 is required for stable flight with HV and HP bullets. For hunting at average 500yds/460m, an Sg of up to 1.5 or more can be used. For longer distances the Sg can be decreased but never less than 1.1.

Note that Sg increases as twist tightens. A 1:10" twist is tighter than a 1:12" twist within a given caliber only. Twist rates given in caliber lengths can be compared across calibers. Choose a bullet length best suited to your rifle twist and type of shooting. When a bullet is specified for a given twist rate, it can also be used in any twist that is tighter. Using it in a slower twist than specified, is not advisable. Some experimentation will be required to determine exact drop tables for your equipment and location.